🖨 Mac Printer Drivers

Home › Xerox printers › Xerox Phaser 4510DT

Xerox Phaser 4510DT driver for Mac

Works on Apple Silicon Macs with macOS 27, macOS 26 Tahoe and macOS 15 Sequoia. One free installer, no Rosetta, nothing to compile.

✅ The Xerox Phaser 4510DT is supported

⬇ Download the free driver

Free · Signed and notarized by Apple · Any Apple Silicon Mac, macOS 12 or later

  1. Plug the printer in with USB and switch it on
  2. Open the downloaded file and click through
  3. Print. The printer is set up for you

Still not printing? Restart the Mac once and re-plug the printer, then see troubleshooting. Wi-Fi printer? See below.

Wi-Fi, network, or not detected over USB

  1. Install the driver above.
  2. Open System Settings → Printers & Scanners and click Add.
  3. Select your printer, then under Use choose Select Software…
  4. Pick “Xerox Phaser 4510DT” ending in “Apple Silicon” and click Add.

Print from your iPhone or iPad? Your Mac can share the Xerox Phaser 4510DT over AirPrint. See how →

Why did my Xerox Phaser 4510DT stop working?

Xerox's own Mac driver for this printer was built for Intel Macs only. On Apple Silicon it ran through Rosetta, but macOS 27 marks Intel-only printer drivers as incompatible, so System Settings now says “The printer software is not compatible with this device”. This package replaces it with Gutenprint 5.3.5, compiled natively for Apple Silicon.

Print quality and black & white: in the print dialog open Printer Features (Printer Options on macOS 27). Quality is under Resolution; for black & white set Color Model to Grayscale. Ink and toner levels can't be shown by open source drivers.

Questions

Does the Xerox Phaser 4510DT work on macOS 27, macOS 26 Tahoe and Apple Silicon?

Yes. This free package adds a native arm64 Gutenprint driver for the Xerox Phaser 4510DT. It runs on every Apple Silicon Mac with macOS 12 or later, including macOS 27, without Rosetta.

Do I need to write my own Xerox Phaser 4510DT driver?

No. The Xerox Phaser 4510DT is already supported by Gutenprint, an open source driver with years of tuning for this printer. Install the package; there is nothing to write, compile or patch.

Why does my Xerox Phaser 4510DT say “The printer software is not compatible with this device”?

Xerox's Mac driver for the Xerox Phaser 4510DT is Intel-only, and macOS 27 marks Intel-only printer drivers as incompatible. Install this package, restart the Mac once, then unplug and re-plug the printer.

Advanced: set it up from Terminal

Driver: Gutenprint 5.3.5 · Model id: xerox-phaser_4510dt

sudo gutenprint-add xerox-phaser_4510dt

Network printer, with a name and its address:

sudo gutenprint-add xerox-phaser_4510dt MyPrinter socket://192.168.1.50
☕ Printing again?
This driver is free and always will be. If it saved you a new printer, you can say thanks with a coffee. Buy me a coffee →

Similar Xerox models

Xerox Phaser 4400N · Xerox Phaser 4500B · Xerox Phaser 4500DT · Xerox Phaser 4500DX · Xerox Phaser 4500N · Xerox Phaser 4510B · Xerox Phaser 4510DX · Xerox Phaser 4510N · Xerox Phaser 5500 · Xerox Phaser 5500B · Xerox Phaser 5500DN · Xerox Phaser 5500DT

← Xerox printers