🖨 Mac Printer Drivers

Home › Xerox printers › Xerox Phaser 3116

Xerox Phaser 3116 driver for Mac

Works on Apple Silicon Macs with macOS 27, macOS 26 Tahoe and macOS 15 Sequoia. One free installer, no Rosetta, nothing to compile.

✅ The Xerox Phaser 3116 is supported

⬇ Download the free driver

Free · Signed and notarized by Apple · Any Apple Silicon Mac, macOS 12 or later

  1. Plug the printer in with USB and switch it on
  2. Open the downloaded file and click through
  3. Print. The printer is set up for you

Still not printing? Restart the Mac once and re-plug the printer, then see troubleshooting. Wi-Fi printer? See below.

Wi-Fi, network, or not detected over USB

  1. Install the driver above.
  2. Open System Settings → Printers & Scanners and click Add.
  3. Select your printer, then under Use choose Select Software…
  4. Pick “Xerox Phaser 3116” ending in “Apple Silicon” and click Add.

Print from your iPhone or iPad? Your Mac can share the Xerox Phaser 3116 over AirPrint. See how →

Why did my Xerox Phaser 3116 stop working?

Xerox's own Mac driver for this printer was built for Intel Macs only. On Apple Silicon it ran through Rosetta, but macOS 27 marks Intel-only printer drivers as incompatible, so System Settings now says “The printer software is not compatible with this device”. This package replaces it with SpliX 2.0.2, compiled natively for Apple Silicon.

The Xerox Phaser 3116 speaks Samsung's SPL printer language rather than PCL or PostScript, so it uses the bundled native arm64 SpliX driver rather than Gutenprint. Toner save, density and resolution are in the print dialog under Printer Features.

Print quality and black & white: in the print dialog open Printer Features (Printer Options on macOS 27). Quality is under Resolution; for black & white set Color Model to Grayscale. Ink and toner levels can't be shown by open source drivers.

Questions

Does the Xerox Phaser 3116 work on macOS 27, macOS 26 Tahoe and Apple Silicon?

Yes. This free package adds a native arm64 SpliX driver for the Xerox Phaser 3116. It runs on every Apple Silicon Mac with macOS 12 or later, including macOS 27, without Rosetta.

Do I need to write my own Xerox Phaser 3116 driver?

No. The Xerox Phaser 3116 is already supported by SpliX, an open source driver with years of tuning for this printer. Install the package; there is nothing to write, compile or patch.

Why does my Xerox Phaser 3116 say “The printer software is not compatible with this device”?

Xerox's Mac driver for the Xerox Phaser 3116 is Intel-only, and macOS 27 marks Intel-only printer drivers as incompatible. Install this package, restart the Mac once, then unplug and re-plug the printer.

Advanced: set it up from Terminal

Driver: SpliX 2.0.2 · Model id: splix-xerox-phaser-3116

sudo gutenprint-add splix-xerox-phaser-3116

Network printer, with a name and its address:

sudo gutenprint-add splix-xerox-phaser-3116 MyPrinter socket://192.168.1.50
☕ Printing again?
This driver is free and always will be. If it saved you a new printer, you can say thanks with a coffee. Buy me a coffee →

Similar Xerox models

Xerox Phaser 2135 · Xerox Phaser 3010 · Xerox Phaser 3020 · Xerox Phaser 3040 · Xerox Phaser 3052 · Xerox Phaser 3115 · Xerox Phaser 3117 · Xerox Phaser 3120 · Xerox Phaser 3121 · Xerox Phaser 3122 · Xerox Phaser 3124 · Xerox Phaser 3130

← Xerox printers