🖨 Mac Printer Drivers

Home › Epson printers › Epson Stylus Office B1100

Epson Stylus Office B1100 driver for Mac

Works on Apple Silicon Macs with macOS 27, macOS 26 Tahoe and macOS 15 Sequoia. One free installer, no Rosetta, nothing to compile.

✅ The Epson Stylus Office B1100 is supported

⬇ Download the free driver

Free · Signed and notarized by Apple · Any Apple Silicon Mac, macOS 12 or later

  1. Plug the printer in with USB and switch it on
  2. Open the downloaded file and click through
  3. Print. The printer is set up for you

Still not printing? Restart the Mac once and re-plug the printer, then see troubleshooting. Wi-Fi printer? See below.

Wi-Fi, network, or not detected over USB

  1. Install the driver above.
  2. Open System Settings → Printers & Scanners and click Add.
  3. Select your printer, then under Use choose Select Software…
  4. Pick “Epson Stylus Office B1100” ending in “Apple Silicon” and click Add.

Print from your iPhone or iPad? Your Mac can share the Epson Stylus Office B1100 over AirPrint. See how →

Why did my Epson Stylus Office B1100 stop working?

Epson's own Mac driver for this printer was built for Intel Macs only. On Apple Silicon it ran through Rosetta, but macOS 27 marks Intel-only printer drivers as incompatible, so System Settings now says “The printer software is not compatible with this device”. This package replaces it with Gutenprint 5.3.5, compiled natively for Apple Silicon.

Black missing or faint? Run a nozzle check from the printer first: a clogged or empty black cartridge is the usual cause, and this driver can't read ink levels like Epson's did. Then make sure no color-only mode is picked under Resolution or Ink Set in Printer Features.

Print quality and black & white: in the print dialog open Printer Features (Printer Options on macOS 27). Quality is under Resolution; for black & white set Color Model to Grayscale. Ink and toner levels can't be shown by open source drivers.

Questions

Does the Epson Stylus Office B1100 work on macOS 27, macOS 26 Tahoe and Apple Silicon?

Yes. This free package adds a native arm64 Gutenprint driver for the Epson Stylus Office B1100. It runs on every Apple Silicon Mac with macOS 12 or later, including macOS 27, without Rosetta.

Do I need to write my own Epson Stylus Office B1100 driver?

No. The Epson Stylus Office B1100 is already supported by Gutenprint, an open source driver with years of tuning for this printer. Install the package; there is nothing to write, compile or patch.

Why does my Epson Stylus Office B1100 say “The printer software is not compatible with this device”?

Epson's Mac driver for the Epson Stylus Office B1100 is Intel-only, and macOS 27 marks Intel-only printer drivers as incompatible. Install this package, restart the Mac once, then unplug and re-plug the printer.

Advanced: set it up from Terminal

Driver: Gutenprint 5.3.5 · Model id: escp2-of-b1100

sudo gutenprint-add escp2-of-b1100

Network printer, with a name and its address:

sudo gutenprint-add escp2-of-b1100 MyPrinter socket://192.168.1.50
☕ Printing again?
This driver is free and always will be. If it saved you a new printer, you can say thanks with a coffee. Buy me a coffee →

Similar Epson models

Epson Stylus NX515 · Epson Stylus NX530 · Epson Stylus NX625 · Epson Stylus NX630 · Epson Stylus NX635 · Epson Stylus NX645 · Epson Stylus Office B30 · Epson Stylus Office B33 · Epson Stylus Office B40W · Epson Stylus Office B42WD · Epson Stylus Office BX300F · Epson Stylus Office BX305F

← Epson printers