🖨 Mac Printer Drivers

Home › Datamax printers › Datamax-ONeil I4310e Mark II

Datamax-ONeil I4310e Mark II driver for Mac

Works on Apple Silicon Macs with macOS 27, macOS 26 Tahoe and macOS 15 Sequoia. One free installer, no Rosetta, nothing to compile.

✅ The Datamax-ONeil I4310e Mark II is supported

⬇ Download the free driver

Free · Signed and notarized by Apple · Any Apple Silicon Mac, macOS 12 or later

  1. Plug the printer in with USB and switch it on
  2. Open the downloaded file and click through
  3. Print. The printer is set up for you

Still not printing? Restart the Mac once and re-plug the printer, then see troubleshooting. Wi-Fi printer? See below.

Wi-Fi, network, or not detected over USB

  1. Install the driver above.
  2. Open System Settings → Printers & Scanners and click Add.
  3. Select your printer, then under Use choose Select Software…
  4. Pick “Datamax-ONeil I4310e Mark II” ending in “Apple Silicon” and click Add.

Print from your iPhone or iPad? Your Mac can share the Datamax-ONeil I4310e Mark II over AirPrint. See how →

Why did my Datamax-ONeil I4310e Mark II stop working?

Datamax's own Mac driver for this printer was built for Intel Macs only. On Apple Silicon it ran through Rosetta, but macOS 27 marks Intel-only printer drivers as incompatible, so System Settings now says “The printer software is not compatible with this device”. This package replaces it with Gutenprint 5.3.5, compiled natively for Apple Silicon.

Print quality and black & white: in the print dialog open Printer Features (Printer Options on macOS 27). Quality is under Resolution; for black & white set Color Model to Grayscale. Ink and toner levels can't be shown by open source drivers.

Questions

Does the Datamax-ONeil I4310e Mark II work on macOS 27, macOS 26 Tahoe and Apple Silicon?

Yes. This free package adds a native arm64 Gutenprint driver for the Datamax-ONeil I4310e Mark II. It runs on every Apple Silicon Mac with macOS 12 or later, including macOS 27, without Rosetta.

Do I need to write my own Datamax-ONeil I4310e Mark II driver?

No. The Datamax-ONeil I4310e Mark II is already supported by Gutenprint, an open source driver with years of tuning for this printer. Install the package; there is nothing to write, compile or patch.

Why does my Datamax-ONeil I4310e Mark II say “The printer software is not compatible with this device”?

Datamax's Mac driver for the Datamax-ONeil I4310e Mark II is Intel-only, and macOS 27 marks Intel-only printer drivers as incompatible. Install this package, restart the Mac once, then unplug and re-plug the printer.

Advanced: set it up from Terminal

Driver: Gutenprint 5.3.5 · Model id: datamax_oneil_I4310e

sudo gutenprint-add datamax_oneil_I4310e

Network printer, with a name and its address:

sudo gutenprint-add datamax_oneil_I4310e MyPrinter socket://192.168.1.50
☕ Printing again?
This driver is free and always will be. If it saved you a new printer, you can say thanks with a coffee. Buy me a coffee →

Similar Datamax models

Datamax-ONeil H6308 · Datamax-ONeil H6310X · Datamax-ONeil H8308 · Datamax-ONeil H8308p · Datamax-ONeil H8308X · Datamax-ONeil I4212e Mark II · Datamax-ONeil I4606e Mark II · Datamax-ONeil p1115 · Datamax-ONeil p1115s · Datamax-ONeil p1120n · Datamax-ONeil p1125 · Datamax-ONeil p1725

← Datamax printers