🖨 Mac Printer Drivers

Home › Canon printers › Canon PIXUS iP2000

Canon PIXUS iP2000 driver for Mac

Works on Apple Silicon Macs with macOS 27, macOS 26 Tahoe and macOS 15 Sequoia. One free installer, no Rosetta, nothing to compile.

✅ The Canon PIXUS iP2000 is supported

⬇ Download the free driver

Free · Signed and notarized by Apple · Any Apple Silicon Mac, macOS 12 or later

  1. Plug the printer in with USB and switch it on
  2. Open the downloaded file and click through
  3. Print. The printer is set up for you

Still not printing? Restart the Mac once and re-plug the printer, then see troubleshooting. Wi-Fi printer? See below.

Wi-Fi, network, or not detected over USB

  1. Install the driver above.
  2. Open System Settings → Printers & Scanners and click Add.
  3. Select your printer, then under Use choose Select Software…
  4. Pick “Canon PIXUS iP2000” ending in “Apple Silicon” and click Add.

Print from your iPhone or iPad? Your Mac can share the Canon PIXUS iP2000 over AirPrint. See how →

Why did my Canon PIXUS iP2000 stop working?

Canon's own Mac driver for this printer was built for Intel Macs only. On Apple Silicon it ran through Rosetta, but macOS 27 marks Intel-only printer drivers as incompatible, so System Settings now says “The printer software is not compatible with this device”. This package replaces it with Gutenprint 5.3.5, compiled natively for Apple Silicon.

Had Canon's own driver installed? It leaves a small kernel extension behind that blocks macOS's USB printer driver. The installer moves it aside, nothing is deleted; restart the Mac once afterwards, then unplug and re-plug the printer.

Print quality and black & white: in the print dialog open Printer Features (Printer Options on macOS 27). Quality is under Resolution; for black & white set Color Model to Grayscale. Ink and toner levels can't be shown by open source drivers.

Questions

Does the Canon PIXUS iP2000 work on macOS 27, macOS 26 Tahoe and Apple Silicon?

Yes. This free package adds a native arm64 Gutenprint driver for the Canon PIXUS iP2000. It runs on every Apple Silicon Mac with macOS 12 or later, including macOS 27, without Rosetta.

Do I need to write my own Canon PIXUS iP2000 driver?

No. The Canon PIXUS iP2000 is already supported by Gutenprint, an open source driver with years of tuning for this printer. Install the package; there is nothing to write, compile or patch.

Why does my Canon PIXUS iP2000 say “The printer software is not compatible with this device”?

Canon's Mac driver for the Canon PIXUS iP2000 is Intel-only, and macOS 27 marks Intel-only printer drivers as incompatible. Install this package, restart the Mac once, then unplug and re-plug the printer.

Advanced: set it up from Terminal

Driver: Gutenprint 5.3.5 · Model id: bjc-PIXUS-iP2000

sudo gutenprint-add bjc-PIXUS-iP2000

Network printer, with a name and its address:

sudo gutenprint-add bjc-PIXUS-iP2000 MyPrinter socket://192.168.1.50
☕ Printing again?
This driver is free and always will be. If it saved you a new printer, you can say thanks with a coffee. Buy me a coffee →

Similar Canon models

Canon PIXUS 9100i · Canon PIXUS 950i · Canon PIXUS 960i · Canon PIXUS 9900i · Canon PIXUS 990i · Canon PIXUS iP110 · Canon PIXUS iP2700 · Canon PIXUS iP3100 · Canon PIXUS iP3300 · Canon PIXUS iP3500 · Canon PIXUS iP3600 · Canon PIXUS iP4100

← Canon printers