🖨 Mac Printer Drivers

Home › Brother printers › Brother HL-L2400D

Brother HL-L2400D driver for Mac

Works on Apple Silicon Macs with macOS 27, macOS 26 Tahoe and macOS 15 Sequoia. One free installer, no Rosetta, nothing to compile.

✅ The Brother HL-L2400D is supported

⬇ Download the free driver

Free · Signed and notarized by Apple · Any Apple Silicon Mac, macOS 12 or later

  1. Plug the printer in with USB and switch it on
  2. Open the downloaded file and click through
  3. Print. The printer is set up for you

Still not printing? Restart the Mac once and re-plug the printer, then see troubleshooting. Wi-Fi printer? See below.

Wi-Fi, network, or not detected over USB

  1. Install the driver above.
  2. Open System Settings → Printers & Scanners and click Add.
  3. Select your printer, then under Use choose Select Software…
  4. Pick “Brother HL-L2400D” ending in “Apple Silicon” and click Add.

Print from your iPhone or iPad? Your Mac can share the Brother HL-L2400D over AirPrint. See how →

Why did my Brother HL-L2400D stop working?

Brother's own Mac driver for this printer was built for Intel Macs only. On Apple Silicon it ran through Rosetta, but macOS 27 marks Intel-only printer drivers as incompatible, so System Settings now says “The printer software is not compatible with this device”. This package replaces it with brlaser 6.2.8, compiled natively for Apple Silicon.

The Brother HL-L2400D is a Brother laser without PCL or AirPrint, so it uses the bundled native arm64 brlaser driver rather than Gutenprint. Duplex, toner save and resolution are in the print dialog under Printer Features.

Print quality and black & white: in the print dialog open Printer Features (Printer Options on macOS 27). Quality is under Resolution; for black & white set Color Model to Grayscale. Ink and toner levels can't be shown by open source drivers.

Questions

Does the Brother HL-L2400D work on macOS 27, macOS 26 Tahoe and Apple Silicon?

Yes. This free package adds a native arm64 brlaser driver for the Brother HL-L2400D. It runs on every Apple Silicon Mac with macOS 12 or later, including macOS 27, without Rosetta.

Do I need to write my own Brother HL-L2400D driver?

No. The Brother HL-L2400D is already supported by brlaser, an open source driver with years of tuning for this printer. Install the package; there is nothing to write, compile or patch.

Why does my Brother HL-L2400D say “The printer software is not compatible with this device”?

Brother's Mac driver for the Brother HL-L2400D is Intel-only, and macOS 27 marks Intel-only printer drivers as incompatible. Install this package, restart the Mac once, then unplug and re-plug the printer.

Advanced: set it up from Terminal

Driver: brlaser 6.2.8 · Model id: brlaser-hl-l2400d

sudo gutenprint-add brlaser-hl-l2400d

Network printer, with a name and its address:

sudo gutenprint-add brlaser-hl-l2400d MyPrinter socket://192.168.1.50
☕ Printing again?
This driver is free and always will be. If it saved you a new printer, you can say thanks with a coffee. Buy me a coffee →

Similar Brother models

Brother HL-L2350DW series · Brother HL-L2360D series · Brother HL-L2370DN series · Brother HL-L2375DW series · Brother HL-L2380DW series · Brother HL-L2390DW · Brother HL-L2400DW · Brother HL-L2400DWE · Brother HL-L2402D · Brother HL-L2405W · Brother HL-L2440DW · Brother HL-L2460DW

← Brother printers